Honda Pioneer 500 Rear Windshield by EMP

Made from 1/8" thick hard coated Polycarbonate (not cheap acrylic like others on the market). It features our "Fast Straps" so you can easily remove the cab back without any tools. Simply unhook the rubber straps. Rubber straps will not scratch your cage.

Cab Back/Dust Stopper Features:

• 1/8” Thick Hard Coated Polycarbonate.
• Attaches with our patent pending rubber "Fast Straps".
• Virtually, unbreakable under normal use.
• Rubber mounting straps will not rust or rattle.
• Cut, bent and packaged in Cleveland Ohio.

EMP Windshield 13861 Care Instructions:-

• Create a mixture of mild liquid dish soap and warm water (Recommended UTV windshield washing/cleaning solution)
• Or use Pre-made Honda Pioneer / Talon windshield solution option:13946
• Only use a clean soft, micro-fiber cloth to wipe gently and do not scrub- apply very light pressure ***Do not use a paper towel and Windex***
• Rinse UTV windshields well and air dry
• Let dry for at 30 minutes to 2 hours depending on the humidity level of your location
• Get on that machine and have an awesome time now that you can see!!!
• Stay safe while riding out there and check out Everything Honda Offroad for more UTV parts and accessories

Note:

When installing on the 520 it is tight fit behind the dump bed. The bed will slightly rub on the cab back when the bed starts to dump.

Featured Blog Post: Wondering which type of windshield is right for you? Check out this blog to get the pros and cons of the various types of UTV windshields!